Kubota BX Series Front Mount 2" Hitch

This front mount receiver hitch is specifically made for the Kubota BX Series Sub Compact Tractors. It comes ready to bolt right up to your tractor with the supplied hardware in just minutes right out of the box. It is built heavy duty to add more capabilities for your Kubota.

This is a standard 2" receiver hitch and will accept most any stand 2" receiver. This allows you to have a trailer ball on the front of your tractor for moving most any item with a hitch such a trailer, boat, log splitter, camper, etc.

It also has a 5/16 grab hook that allows you to hook up a chain for heavy pulling or dragging. At the bottom of the receiver there is a D-ring that allows a rope or strap to be connected as an additional option, or it can be used as an anchor point when transporting your tractor.

This hitch can be added to tractors that have the factory grill guard as it will bolt right up over the front plate of the grill guard using the same mounting holes. It fits all Kubota BX Series Tractors from the BX 1500 to the BX 2660 and also fits the BX 24 and BX 25 Tractors.

IMPORTANT
To allow front end loader clearance the depth of the hitch is 2 & 3/4 inches deep and some receivers may need to be shortened an inch or so to allow the 5/8 pin to line up. We know this inconvenient but the short depth is a must for front end loader clearance on some loader models.

If you don't want to shorten your receiver, this hitch can be purchased with a matching receiver that has a shortened length already that is designed for this hitch.

We also offer BX Grill Guards with this hitch built into the guard. If you need a grill guard click here.

BX Series Front Mount 2" Hitch

Item # BXH01   $99 + Free Shipping w/ UPS (Continental US only)

BX Series Front Mount 2" Hitch with Receiver

Item # BXHR01   $129 + Free Shipping w/ UPS (Continental US only)